VISUAL TruView Installations- Und Einrichtungsanleitung Seite 5

Guide and that you follow the manufacturer's terms and conditions for
use.
For service or to request information about the warranty, contact Dell
Technical Support.
Limited Use Licenses
The installed copies of Microsoft Windows and Microsoft SQL Server
are licensed for Visual TruView applications only.
Do not install any other applications on the Visual TruView server.
Doing so invalidates the Microsoft licenses for Windows Server and
SQL Server.
You can install software that maintains the operating system (such as
critical updates and service packs), remote backup server software,
system management tools, remote management software, and virus-
checking software.
Registration
The product is already registered with Fluke Networks.
Registering your product with Dell enables you to obtain personalized
support for the Visual TruView server. Refer to the Dell server "Product
Information Guide" for details.
Prepare the Site
•
Before installing the Visual TruView server, make sure that there
are two separate, dedicated, and properly grounded power
outlets for the dual power supplies.
•
Check that there is sufficient space to accommodate the Visual
TruView server.
•
Make sure that the installation site meets the environmental
requirements for cooling, humidity, dust, and ventilation. See the
Dell server Product Information Guide for details.
•
Determine how the Ethernet management port will be cabled to
your network.
Five 10/100/1000 MB Ethernet ports are located on the rear
panel. The ports labeled Gb1, Gb2, Gb3, and Gb4 are used to
send data to the Visual TruView server and provide network
access into the web-based Appliance System Administration
utility. The fifth port (wrench icon) is used for remote management
of the Visual TruView server. To connect to these ports, you need
standard straight-through Ethernet cables (one cable is supplied).
2