Sony PFM-42X1 Bedienungsanleitung Seite 88

Adjusting the Picture
(1) Press M/m to move the cursor (yellow) to the
gain that you want to adjust and press ENTER
or ,.
The following menu appears on the screen.
R e d G a i n
(2) Adjust the gain (–15 to +15) with M/m/</,
and press ENTER.
The menu returns to the Color Temp. menu.
To rename the adjusted color temperature, follow
the steps below.
(3) Press M/m to move the cursor (yellow) to
"Name Set" and press ENTER.
The following menu appears on the screen.
A d j u s t P i c t u r e
C o l o r T e m p . :
N a m e
0 1 2 3 4 5 6 7 8 9 A B C
I J K L M N O P Q R S T U
a b c d e f g h
s t u v w x y z ( ) [ ] <
= % °C $ ; : . ' ,
S e l e c t
(4) Select a character or symbol from the
character list with M/m/</, and press
ENTER. The selected character is input. If you
input a wrong character or symbol, select
"<" on the screen to backspace the cursor
one character and reselect the right one.
When "MENU Function" (page 23 (GB)) in the
Initial Setup menu is set to "Return," the M/m
buttons on the Remote Commander move the
cursor left and right. To make the M/m buttons
move the cursor up and down, set "MENU
Function" to "On/Off."
32
(GB)
0 0
U s e r 1
S e t
D E F G H
V W X Y Z
i j k l m n o p q r
> + – × /
E n d
T t
S e t E n d
ENTER MENU
Character list
(5) Repeat step (4) and after you have finished
entering the name, select "End" and press
ENTER.
The menu returns to the Color Temp. menu.