Location And Function Of Parts And Controls; Front / Rear / Bottom - Sony PFM-42X1 Bedienungsanleitung

Location and Function
of Parts and Controls

Front / Rear / Bottom

Front
Rear
2
The shaded areas shown in the illustration above are all
ventilation holes.
Bottom
1
3
5 6
4
5 6

Location and Function of Parts and Controls

1 1 (standby) switch / indicator section
For details on the 1 (standby) switch / indicator section,
see "1 (standby) Switch / Indicator Section" on page 8
(GB).
2 Control button section
For details on the control button section, see "Control
Button Section (Top)" on page 8 (GB).
3 Stand installation hooks
Use these hooks to install the stand (not supplied).
4 SPEAKER Socket
Connects the speakers (not supplied) to this socket to
output the audio matching the signal displayed on the
screen.
5 Connector panel
For details on the connector panel, see "Connector Panel"
on page 9 (GB).
6 - AC IN socket
Connect the supplied AC power cord to this socket
and to a wall outlet. Once you connect the AC power
cord, the STANDBY indicator lights up in red and the
display goes into the standby mode.
For more details on the power cord, see "Connecting the
AC Power Cord" on page 15 (GB).
7
(GB)