Schaltung; Seat Angle Adjustment - HASE Tagun Gebrauchsanweisung

Schaltung

www.hasebikes.com / Hiberniastr. 2 / D-45731 Waltrop
Tel: 02309 9377-0/ Fax:-201

Seat angle adjustment

Seat angle adjustment:
To adjust the seat angle, the quick release lever of the upper
seat mounting must be unlocked. The elongated holes in the
mounting plates allow variable adjustment. Once completed,
relock the quick release lever.
Note:
Locking and unlocking the quick release levers is always done
either by levering up or down respectively.
To adjust the locking force, screw the nut at the other end in
or out.
Tip:
For "beginners" it is advised to set the seat angle slightly more
upright as the recumbent position is likely to be a new
experience.
Seite 14
The upper seat mounting is the main mounting
of the seat. At greater loads (heavy riders), the
quick release lever must be secured tighter.
www.hasebikes.com / Hiberniastr. 2 / D-45731 Waltrop
Tel: 02309 9377-0/ Fax:-201
Longholes
Quickrelease
Page
Seite 31