The Sounddecoder (Only For 72159 And 78159); Steam Locomotive Gruppo 736 Function Key Allocation (Delivery State); Locomotive Settings - roco 736, FS Handbuch

▪ Steam locomotive Gruppo 736, FS function key allocation (delivery state)
The factory-set default adress of the lok is 03.
F-Key Function
F0 Light ON/OFF
F1 Travel sound ON/OFF
F2 Whistle
F3 Whistle
F4
Conductor whistle
F5 Scoop of coal
F6
Shunting mode
F7 Air pump
F8
Injector
F9 Coupling
F10 Light machine
F11 Blow-down
F12 Whistle
F13 Drainage (only if F1 is active)
F14 Mute - key
F15
Squeaking points
F20 Rattlesnake

▪ Locomotive Settings

The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous decoder proper-
ties to your wishes however. Certain parameters (referred to as CVs – Configuration Variable – or register) can be
amended.
Please check before each programming if this is really necessary. Incorrect settings can result in the decoder not
reacting correctly.
The decoder is preprogrammed with 128/28 speed steps at the factory for a high level of comfort. This means that
it can be used together with all of the modern DCC ( multi MAUS/ multi MAUS
The Sounddecoder has been especially modified for the additional functions and must not be replaced
with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the programming track.
8072158920.indd 21
The Sounddecoder

pro ) and Motorola 2) control devices.
28.11.2016 13:22:46
21 21
21