WimTec PROOF P4 - 6 V Montage- Und Bedienungsanleitung Seite 19

PROOF P4
Assembly: 6 V battery version
7
9
7. Configure the desired time at the electronics module.
(see p. 16)
8. Hook the shower panel into the rear bracket strap.
ATTENTION! Be careful not to bend or crimp any cables or
tubes.
9.
Connect the flexible tubes and included valves to the water
inlets.
10. Plug-in the battery module. (safety locking mechanism of the
magnetic valve starts).
8
10
Shower paneel
Art.No. 120 998
ATTENTION!
Perform the following steps
in the order indicated!
WimTec PROOF P4
EN
!
19