Phantom Power - AKG C1000S Bedienungsanleitung

Powering

Phantom power

NOTE
24
Figure 5: Connecting via a balanced XLR cable
1) Use an XLR cable to connect the microphone to a balanced XLR input
with phantom power.
2) Switch on the phantom power. (Refer to the instruction manual of the unit
to which you connected your device).
The microphone will automatically switch from battery mode to phantom power
mode and deactivate the Status LED.
Therefore, you do not need to remove the batteries from the microphone. The
Status LED will remain off.
C1000S