Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SAFETY ROPE
FUSE: T 1.6 A, 250 V
POWER IN:100-240 V AC, 50/60 Hz ~
5
6
7
(5) Attachment eyelet
(6) Fuse holder
(7) Power supply
(8) Microphone
(9) LED display with operating buttons
(10) Sensitivity control
(11) DMX out
(12) DMX in
(13) Power out
INSTALLATION
The device may be mounted to the floor or to the wall or ceiling via the bracket. Always choose screws and
plugs which are suitable for use in your wall/ceiling and have enough holding power. Fasten the device in
such way that it will not fall down. If necessary, the device can also be fastened to a truss using appropriate
clamps. To align the device, release the fixation screws at the mounting bracket, adjust the desired
inclination angle and retighten the fixation screws.
Overhead rigging
Please consider the EN 60598-2-17and the respective national standards during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
MIC
MODE
UP
DOWN
8
9
DANGER TO LIFE!
24/36
DMX IN
DMX OUT
SENSITIVITY
DMX occupation:
1: Ground
2: Signal (-)
ENTER
3: Signal (+)
10
11
12
00110254, Version 1.1
POWER OUT
13
Werbung
Inhaltsverzeichnis
