Maintenance - Makita DC24SA Betriebsanleitung

NOTE:
• The battery charger is for charging Makita-battery cartridge. Never use it for other purposes or for other manufac-
turer's batteries.
• When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it
may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the bat-
tery cartridge fully after discharging it completely and recharging a couple of times.
• If you charge a battery cartridge from a just-operated tool or battery cartridge which has been left in a location
exposed to direct sunlight for a long time, the charging light may flash in red color. If this occurs, wait for a while.
Charging will begin after the battery cartridge is cooled by the cooling fan installed in the charger. When the temper-
ature on battery is more than approx. 70°C, two charging lights may flash in red color, and when approx. 50°C –
70°C, one charging light in red color.
• If the charging light flashes alternately in green and red color, charging is not possible. The terminals on the charger
or battery cartridge are clogged with dust or the battery cartridge is worn out or damaged.

MAINTENANCE

CAUTION:
Always be sure that the charger is unplugged and the battery cartridge is removed before attempting to perform
inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by a Makita
Authorized or Factory Service Centers, always using Makita replacement parts.
Battery Type Capacity (mAh)
B9017A
B2417
BH1220
BH1420
BH1427
BH2420
BH9020A
Number of cells
1,700 8
1,700 20
2,000 10
2,000 12
2,700 12
2,000 20
2,000 8
Battery Type Capacity (mAh)
BH9020 2,000
B2430 3,000
BH1233 3,300
BH1433 3,300
BH2433 3,300
BH9033 3,300
BH9033A 3,300
Number of cells
8
20
10
12
20
8
8
5