Fig.7 Assembly/Disassembly Of Night Screens; Fig.8 Condensate Container (Version Without Evaporator); Fig.9 Overfl Ow (Version With Evaporator); Fig.10 Control Panel Of The Device - Igloo BASIA 2 Bedienungsanleitung

1 - Lower night screen (shorter one) – mounted as the fi rst one
2 - Upper night screen (longer one) – mounted as the second one
3 - "Leaf" of the aluminium lamp (hides and secures the night screens before
Fig.9 Overfl ow (version with evaporator)
1 – Water outlet from the body of the device (water-sealed)
2 – Rail water outlet hose (condensate outfl ow after defro-
3 – Overfl ow (it is necessary to empty the condensate,
when water overfl ows the evaporator container!)
1 2
20
User manual Basia 2, Tobi

Fig.7 Assembly/disassembly of night screens

4 - Night screen guide (aluminium profi le)
sting the evaporator)
4 - Evaporator
3
falling out)
1
1

Fig.8 Condensate container (version without evaporator)

1 – Water outlet from the body of the device (water-sealed)
2
2 – Rail water outlet hose (condensate outfl ow after defrosting
the evaporator)
3 - Condensate container (empty the condensate!!!)
3

Fig.10 Control panel of the device

1 - Main switch (turns on/off the aggregate of the
device)
2 – Lighting switch
3 - Thermostat (temperature regulator) panel (service
details in Chapter No. 7 p. 25 or 26)
1
2
2
1
2
www.igloo.pl
en
3
4
2
1
4
3