Funtions Interface; Switch Function Details - Carson Reflex Stick Ultimate Touch 500501002 Betriebsanleitung

1.6 Functions interface
GB
All functions use a set of standard user interface
objects. The bottom tray can contain the following
buttons:
1 2

1.7 Switch function details

1. SwA~SwH
Choose one switch direction from upward direction, middle direction and
downward direction as the open status when the switches (SwA~SwH) are
assigned to enable or disable functions.
2. Ail, Ele, Thro, Rud
The sticks (Ail, Ele, Thro, Rud) are assigned to adjust the function rates.
3. VrA~VrE
The knobs (VrA~VrE) are assigned parameters to adjust the function rates.
4. LSW, LS1~LS3
The logic function needs to be defined at first when logic switches are
assigned to enable or disable functions. Logic switches function as shown in
picture.
Reset a function
Yes: reset to default the current displayed function
No: no operation
92 CARSON Reflex Stick Ultimate Touch 500501002
3 4
1 These 2 buttons respectively enable and
disable the current function.
Select a switch to activate functions or make a
2
selection.
The default button sets back the current page
3
parameters to their default values.
4
The back button returns to the previous screen.