Timer - Carson Reflex Stick Ultimate Touch 500501002 Betriebsanleitung

1.30 Timer

GB
This function is used to control time and reduce the
risk of aircraft crashing There are three choices for
timing.
ModeI/Engine: Model timer is the total time of
turning on the model. Engine timer counts the time
when throttle value exceeds the set value. Both
timers can be reset by touching ‚Reset' button, and
engine timer can modify throttle value by moving
wheel on the screen.
As shown in pictures 21.31 and 21 .321 When throttle
exceeds -80%, the engine timer starts to time.
Multi-purpose timer 1 and 2: Multi-purpose timer 1
and 2 can select Up timer, Down timer, and Down
then up for timing.
lt can individually start, stop, and reset and you can
also set a switch or logic switch to start or stop it.
Up timer: Timing starts from Os. It can be started,
stopped and reset.
Down timer: Default count down from 1 minute, it
can be modified by moving wheel.
Down then up: Default countdown from 1 minute,
and it start to up timing after 1 minute. lt can be
modified by moving wheel.
As shown in picture 21.29: Make countdown time
back to beginning time you set.
As shown in picture 21.30 Down timer set to 5
minutes and it stops now. The race timer start, stop
function can be assigned to a push button.
Pic. 21.29 Pic. 21.30
106 CARSON Reflex Stick Ultimate Touch 500501002