I-Bus Setup; Servo Frequency Selection; System - Carson Reflex Stick Ultimate Touch 500501002 Betriebsanleitung

1.47 i-bus setup

If servos are connected on the external serial
interface(not included), this function attributes
a channel to each servo. Choose the channel to
attribute.

1.48 Servo frequency selection

Adjust the servo frequency from 50HZ to 100HZ.
Push the Exit.buttonto save and go to exit.

1.49 System

This function is used to set some parameters of the
system
CARSON Reflex Stick Ultimate Touch 500501002
Pic. 21.62
Pic. 21.63
Pic. 21.64
115
GB