Assign An Ip Address - Axis P33-Serie Installationsanleitung

Page 6

Assign an IP address

The network camera is designed for use on an Ethernet network and requires an IP address for
access. Most networks today have a DHCP server that automatically assigns IP addresses to
connected devices. If your network does not have a DHCP server, the network camera will use
192.168.0.90 as the default IP address.
AXIS IP Utility and AXIS Camera Management are the recommended methods for setting an IP
address in Windows. These free applications are available on the Axis Network Video Product CD
supplied with this product, or they can be downloaded from www.axis.com/techsup Depending on
the number of cameras you wish to install, use the method that suits you best.
Method
AXIS IP Utility
See page 7
AXIS Camera Management
See page 8
Note:
If you are unable to set the IP address, check for any firewall blocking the operation.
See page 11 for other available methods for setting or discovering the IP address of the network
camera, in relation to other operating systems.
AXIS P3343/P3343-V/P3344/P3344-V Installation Guide
Recommended for
Single camera
Small installations
Multiple cameras
Large installations
Installation on a different subnet
Operating system
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista