Straightening Hair; After Use - Beurer HS 60 Gebrauchsanweisung

• Switch the device off immediately if it is faulty or not working properly.
IMPORTANT
• Untangle the mains cable [7] if it is twisted.
• Do not pull, twist or bend the mains cable [7] and do not pull or route it over/on sharp, pointed objects or
hot surfaces.
• Do not jam the mains cable [7] in drawers or doors, for example. Damaged or tangled mains cables increase
the risk of electric shock!

Straightening hair

1. Ensure that your hair is clean, dry, unknotted and free of styling products (the exception to
this is special products designed to help straighten hair).
2. Insert the mains plug into a socket.
3. To switch on the hair straightening brush, press and hold the ON/OFF
operation indicator glows red.
4. Use the +/- buttons [4] to set the desired temperature according to the type of hair. The temperature display [3]
flashes during the heat-up phase. When the desired temperature has been reached, the temperature display
will light up permanently. The temperature can be fixed by pressing the on/off switch [7] twice. "LOC" appears
on the temperature display [3]. You can only switch off the hair straighteners if the button lock is deactivated.
To deactivate the button lock, press the on/off switch [7] again 2 times. "LOC" disappears from the temper-
ature display [3].
5. We recommend the following temperature setting depending on your hair type:
120 °C to 140 °C
140 °C to 160 °C
160 °C to 200 °C
6. Part the hair into individual sections of approximately 6 to 7 cm. Hold
the strands taut.
7. Slowly move the hair straightening brush from the roots to the tips in a
fluid motion. Do not hold the hair straightening brush in one place for
more than two seconds. This will achieve the best results without sub-
jecting your hair to excess stress or damage.
8. You can style the ends of your hair by turning the hair straightening brush
inwards or outwards before running it over the tips of the hair.
WARNING
To avoid burns, do not touch the bristles during use.
Note
The hair straightening brush has an automatic switch-off function. The hair straightening brush switches off
automatically after 30 minutes.

After use

1. To switch off the hair straightening brush, press and hold the ON/OFF
operation indicator [2] turns off and
is now turned off.
2. After each use, pull the mains plug out of the socket.
3. Place the hair straightening brush on a non-flammable surface. Allow the hair straightening brush to cool
down completely.
For fine, brittle, coloured or bleached hair
For normal hair
Thick and resistant hair
OFF
is displayed in the temperature display. The hair straightening brush
11
switch [5] for three seconds. The
switch [5] for three seconds. The