Technical Data - Sky METIS 3 42 Benutzerhandbuch

16 16
3) Risers Diagram METIS 3/40 & METIS 3/42
Trimmers in neutral position
- all risers have the same length
 A 34,0 cm
 B 34,0 cm
 C 34,0 cm
 D 34,0 cm
Tolerance: +/- 0,5 cm

4) Technical Data

 Flat span: see specifications.
 Projected area: see specifications.
 Number of Cells: see specifications.
 Risers: see specifications.
 Riser adjustment range: refer to Riser Diagram METIS
3/40 and METIS 3/42
 Speed system: no speed system on METIS 3.
 The brakes are adjusted to the correct length. Depending
on pilot preferences, they can be lengthened by up to 5 cm.
Under no circumstances shall they be made shorter
than the original setting.
 Line length: check line plan and line table.
 Risers length: Refer to Risers Diagram METIS 3/40 and
METIS 3/42.
Released trimmers
- C and D-risers are longer than A and B
 A 34,0 cm
 B 36,2 cm
 C 39,6 cm
 D 42,8 cm
METIS 3 40
Flat surface area (m 2 ) 40,00
Flat span (m) 14,42
Flat aspect ratio 5,20
Projected surface (m 2 ) 35,04
Projected span (m) 11,77
Projected aspect ratio 3,95
Number of cells 54
Weight of the glider (kg) 7,60
Take-off weight (kg) 110-210
Trim speed (km/h) 38-40
Min. speed (km/h) 24-25
Max. speed (km/h) 45-48
Max. glide ratio >9
Min. sink rate (m/s) <1,2
Certification EN/LTF B
42
42,00
14,78
5,20
36,79
12,06
3,95
54
7,90
120-220
38-40
24-25
45-48
>9
<1,2
EN/LTF B