Getting Started - Beurer PM 90 Gebrauchsanleitung

G
ETTING STARTED
Insert battery/Change battery
If you do not want to insert or change the battery yourself,
please bring it to a watchmaker.
The battery compartment of the HR monitor is located on the back of
the monitor. Place the monitor with the front facing downwards on a
soft surface and insert the battery as follows:
1
Using a coin, turn the lid of the battery
compartment anticlockwise until the lid
comes off.
2
Only when changing the battery: remove
the battery from the battery compart-
ment with the aid of a pointed, non-
metallic tool, e.g. toothpick.
3 Put the battery into the battery com-
partment in such a way that the battery
is underneath the clip and the transpa-
rent insulation sheet and the positive
pole (+) faces upwards. Lock the battery
into place.
12