Beurer PM 90 Gebrauchsanleitung Seite 56

display "0.0" appears. Step onto the
scale barefoot. Pay attention that
you are standing calmly on the
stainless steel electrodes.
The scale calculates your weight
start / stop
and your body fat and transmit both
values to the monitor. For a short
period during the transmission hori-
zontal lines are shown on the dis-
play. Please note that the body fat
can only be measured and transmit-
ted, if you have set the personal
user data on the scale. You can
however also transmit your weight
without measuring your body fat.
Your weight is automatically updated
during the measurement in the
ting
calculated by the scale
displayed. If you do not measure
your weight, then the last weight
stored will be displayed.
Your body fat which was calculated
option / set
by the scale
you do not measure your body fat,
then the last body fat stored will be
displayed.
Press the button again and again
option / set
until you get into the main display.
menu. Your weight which was
BF[%]
54
Set-
is
Weight[kg]
is displayed. If