Beurer PM 90 Gebrauchsanleitung Seite 27

you stop training and the power saving mode is subsequently ac-
tivated.
If the LightManager was activated (ON) while the pulse was not
being measured, the LightManager function will remain active for
an hour and then it will be automatically switched off (OFF). If you
press a button during this time, the LightManager will be active for
a further sixty minutes.
You can switch off the LightManager manually at any time to
reduce the power consumption as much as possible.
Change into the
menu
Limits
option / set
Units
option / set
LightMan
option / set
OFF LightMan
start / stop
play flashes.
start / stop
function alternately on (On) and off
(Off).
Back to the
option / set
Setting
is displayed.
is displayed.
is displayed.
is displayed. The dis-
Switches the LightManager
LightMan
25
menu.
display.
G
B