Transmission Of Signal And Methods Of Devices Measurement; Getting Started; Putting On The Heart Rate Monitor; Activating The Hr Watch From Transport Mode - Beurer PM 62 Gebrauchsanleitung

T
RANSMISSION OF SIGNAL AND METHODS OF
UREMENT
Receiving range of the heart rate monitor
Your heart rate monitor picks up the heart rate signals sent by the chest
strap transmitter within a range of 70 centimeters.
Sensors on the chest strap
The entire chest strap consists of two components: the actual chest
strap and an elastic tension belt. On the inside of the chest strap con-
tacting the body, there are two rectangular, corrugated sensors. Both
sensors determine your heart rate ECG exactly and transmit this to the
heart rate monitor.
The chest strap is compatible with other analogue devices, such as e.g.
ergometers.
G
ETTING STARTED

Putting on the heart rate monitor

You can wear your heart rate monitor like a wrist watch. In order to fix
the heart rate monitor on bike handle bars, attach the bike mount in-
cluded to the handle bars. Tighten the heart rate monitor around the
mount such that it is not able to slip while riding.

Activating the HR watch from transport mode

During transport the monitor is blank. You can remove the transport
mode by pressing the button MENU and then
9
D M
EVICES EAS-
START/STOP .
G
B