Maintenance And Cleaning; Environmental Protection; Declaration Of Conformity - Bosch DL 0 607 460 001 Bedienungsanleitung

DL_bu_3609929393_t.fm5 Seite 12 Donnerstag, 18. Mai 2000 12:29 12

Maintenance and Cleaning

Before performing any work on the machine
itself, disconnect the air supply.
Keep the machine and the tool holder clean at all times.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorised customer services agent
for Bosch pneumatic tools.
For all correspondence and spare parts orders, always
include the 10-digit order number of the machine.
Lubrication
Lubricant:
Special gearbox grease 225 ml
3 605 430 009
Molycote grease
SAE 10 / SAE 20 motor oil
Clean regularly the screen on the air inlet of the
machine. For this purpose, unscrew the hose
connection piece 8 and remove dust and dirt
particles from the screen. Then firmly remount the
hose connection piece.
Wash out the gearbox with petroleum after the first
approx. 150 hours of operation and then every 300
hours of operation and lubricate with special gearbox
grease.
Lubricate the moving parts of the clutch after approx.
each 100 000 screwing operations with a few drops of
SAE 10 / SAE 20 motor oil. Grease the sliding and
rolling parts with Molycote grease. Check the clutch
adjustment afterwards.
Any Bosch customer service centre can perform this
work quickly and reliably.
Dispose of lubricants and cleaning agents in an
environmentally correct manner. Observe legal
regulations.

Environmental Protection

Recycle raw materials instead of disposing as
waste.
Machine, accessories and packaging should be
sorted for environment-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
12
Guarantee
We guarantee Bosch products in accordance with
statutory/country-specific regulations (proof of pur-
chase by invoice or delivery note).
Damage attributable to normal wear and tear, over-
load or improper handling will be excluded from the
guarantee.
In case of a claim, please send the machine, com-
pletely assembled, to your dealer or the Bosch
Service Centre for pneumatic tools or power tools.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . (01895) 838789
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4517127
USA
Power Tool Service
3718 Polk Avenue
Houston, TX 77003
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . (713) 228-0619
We declare under our sole responsibility that this
product is in conformity with the following standards or
standardization
according to the provisions of the regulations
89/392/EEC.
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Specification subject to alteration without notice
Preferential
Partner
Service . . . . . . . . . . . . . . . . . . . . . (01895) 838782
Advice line . . . . . . . . . . . . . . . . . . (01895) 838402
. . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4515211
. . . . . . . . . . . . . . . . . . . . . . . . . . (713) 228-0100

Declaration of conformity

documents:
Dr. Gerhard Felten
EN 792, EN 50 144
Dr. Eckerhard Strötgen