Other Settings - Kenwood KDC-BT39DAB Bedienungsanleitung

DIGITAL RADIO (DAB)
Search for an ensemble
1 Press repeatedly to select DAB.
2 Press repeatedly to select DB1/ DB2/ DB3.
Press and hold S / T to search for an ensemble.
3
Press S / T to select an ensemble, service or component to
4
listen.
• To change the searching method for S / T: Press
repeatedly.
: Press S / T: Select an ensemble, service or component.
AUTO1
Press and hold S / T: Automatically search for an
ensemble.
: Press S / T: Search for a preset station.
AUTO2
MANUAL : Press S / T: Select an ensemble, service or component.
Press and hold S / T: Manually search for an ensemble.
• To store a service: Press and hold one of the number buttons (1 to 6).
• To select a stored service: Press one of the number buttons (1 to 6).
Select a service
1 Enter Service Search mode.
: Press
: Press DAB.
2 Turn the volume knob or press J / K to select a service, then press
the knob.
To cancel the Service Search mode, press
6
(LIST UPDATE).
or DAB.
Select a service by name
1 Enter Service Search mode.
: Press
: Press DAB.
2 Turn the volume knob quickly to enter Alphabet Search mode.
Turn the volume knob or press S / T to select the character to
3
be searched for.
Press J / K to go to the previous/next page.
4
Press the volume knob to start searching.
5
Turn the volume knob to select a service, then press the knob.
To cancel the Alphabet Search mode, press

Other settings

1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to make a selection (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
TUNER SETTING
AF SET ON:
While listening to DAB: Automatically switch to FM broadcasting the same
program if the DAB signal becomes weak. It will switch back to DAB sound
when the signal becomes strong again.
While listening to FM: Automatically switch to DAB source broadcasting the
same program (if available). ;
OFF: Cancels.
TI ON: Allows the unit to temporarily switch to Traffic Information if available
("TI" lights up). ; OFF: Cancels.
(LIST UPDATE).
.
.
Default: XX