Operation - Klarstein VitAir Anschlusshinweise Und Anwedungshinweise

Getting started
1. According to your cooking, place the fryer pan, low rack or even streamer into the bowl container before
putting food inside. Keep the food about 15-20mm from the bowl edge to allow maximum hot air
circulation. If youuse the baking cage , please put the food inside before place into the container.
2. Close the function lid and make sure the food will not touch the top of lid.
Before closing the lid you must push the the slider on the hinge. Do not push down the lid forcefully
lest you should damage the appliance.
3. Insert the power cord firmly into the wall AC main outlet.
4. Press "Start" key and then to set your desired cooking time and temperature. Now you can choose the
desired cooking time and temperature (see next chapter). By pressing the "Start" key again, the airfryer
starts to cook.
5. The timer will stop working after the preset time period has passed and beep 3 times to remind you the
cooking time is over and desired food to be cooked and served. The fan inside the appliance will continue
running to cool down the unit. It is suggested to open, cut the power or cook next dish after the fan is
stopped. Extreme caution must be used when opening the lid and moving the hot food from the unit.
Use the tongs.
6. Without long time operation, the unit will turn off by itself even is connected with the power source. Turn
it on with start button.
It is not allowed to turn the unit on without cooking any food inside!
Programs
A program consists of the preset time, the preset temperature and optionally the rolling. The programs sim-
plify and speed up the start.
Starting a program
1. Press the start key to activate the appliance.
2. Next you select the programs by pressing the menu key. Skip through the programs one by one by
repeatedly pressing the menu key. When the respective program is activated its symbol appears on the
display.
3. Now press the start key. The program starts.
4. If you want to cancel a program press the start button again.
15

Operation