Clatronic FR 2881 Bedienungsanleitung, Garantie Seite 40

5....-05-FR 2881
7. Rub dry humid foods with a cloth before frying.
GB
8. After use, unplug the deep fryer.
9. If you should switch on your deep fat fryer by accident when there is no oil or fat
in it, the overheating protection device will switch on automatically. The device is
then no longer operable. Remove the plug from the socket.
1. Make sure that the appliance is unplugged and switched off.
2. Unlock the lid by pressing the release button (2).
3. Remove the deep frying basket and fill oil or fat into the container. Only fill bet-
ween the min. and max. mark.
Please note the following important information!
If you use fat, divide it up into small pieces and place it on the floor of the deep
frying vessel.
Under no circumstances should you place the fat in the deep frying basket!
4. Insert the plug into a 230 V, 50 Hz power socket and switch on the deep fat
fryer using the POWER ON/OFF button (4). Then close the lid during the hea-
ting-up phase.
5. The POWER control lamp (5) and the HEATING control lamp (6) light up.
Please set the temperature regulator (7) to the desired temperature.
6. Once the set temperature has been reached, the HEATING control lamp (6)
goes off. The POWER control lamp remains on and shows that the device is in
operation.
7. Now fill the deep-fry basket. Please ensure that the basket is not filled above
the hot fat. Open the lid and insert the basket with the items to be fried carefully
into the recess. The deep-fry basket is now in the hot fat.
8. Now close the lid. Release the handle (by pressing the button (9) on the hand-
le).
9. During the deep-frying process the HEATING control lamp switches on and off
several times. This is normal and shows that the temperature is being thermost-
atically controlled and maintained. After the frying time has elapsed (frying
times are to be found on the food packaging or in the recipe), open the lid
carefully (as it is possible that hot steam will be released). Now remove the
deep-frying basket.
10. Allow the oil to drain from the food that has been fried by hanging the deep-fry-
ing basket on the edge of the fat container with the help of the device on the
basket.
11. In order to switch the deep-fat fryer off, press the POWER ON/OFF button (4)
and remove the mains plug from the socket.
1. Make sure that the plug is pulled out.
2. Wait until the deep fryer is completely cool before cleaning. Wait in any case for
1 to 2 hours after use before using again to avoid burns.
40
14.05.2004 12:39 Uhr
Use
Cleaning
Seite 40