Special Drinks; How To Select Special Drinks; Dispensing Hot Water; Inserting And Removing The Hot Water Dispensing Spout - Philips Saeco Incanto Bedienungsanleitung

Special drinks

How to select special drinks

Dispensing hot water

1
1
2
-
To stop dispensing milk or coffee, press the OK button.
4 After brewing milk-based coffee beverages, the display asks you if you
want to perform a quick clean of the milk carafe spout. You have 10
seconds to perform the quick clean.You can perform the quick clean
while leaving the milk inside the milk carafe. Remove the cup with the
beverage and place a container under the milk froth dispensing spout.
Press the OK button twice to confirm that you want to quick clean, or
press the ESC button to perform the quick clean later. It is recommended
to perform quick clean at least once a day, see chapter 'Cleaning the milk
carafe'.
1 Press the MENU button and select 'Drinks'.
2 Press the OK button to confirm.
3 Scroll the menu and select the desired beverage.

Inserting and removing the hot water dispensing spout

To insert the hot water dispensing spout:
1 Tilt the hot water dispensing spout slightly and insert it into the machine.
2 Press and turn the hot water dispensing spout downwards to lock it in the
machine.
To remove the hot water spout:
1 Press the release buttons on the sides of the hot water dispensing spout
to unlock it.
2 Lift the hot water dispensing spout slightly and pull it out of the machine.
Dispensing hot water
Caution: Steam and hot water may spray out of the hot water dispensing
spout when brewing starts. Wait until the cycle has ended before
removing the hot water dispensing spout.
1 Press the MENU button. Select 'Drinks', confirm and scroll to select 'Hot
water'.
English
19