Switching On The Appliance; Selecting The Temperature - Siemens KA..N Gebrauchs- Und Aufstellanleitung

en
Installation
Installation location
Basic model
Model with dispenser
Model with home bar
Installing and connecting
the appliance
Have a technician install the
appliance and connect it to the
water supply according to the
enclosed installation instructions.
26
Electrical connection
If the appliance is to be operated in
a non European country, check on
the rating plate whether the indica
ted voltage and current type corres
pond to the values of your mains
supply. The rating plate is situated
in the bottom left hand side of the
appliance. Any necessary exchan
ging of the mains lead should car
ried out by a specialist electrician.
Warning!
!
Never connect the appliance
104 kg
to electronic energy saver plugs
113 kg
(e.g. Ecoboy: Sava Plug) or to
power inverters which convert the
115 kg
direct current to 230 V alternating
current (e.g. solar equipment, power
supplies on ships).
Observe ambient tem
perature and ventilation
Atmosphere grade
SN
N
ST
T
Ventilation
Switching on
the appliance
S
Note:
Selecting the
temperature
Appliances with control
panel
Permitted ambient
S
temperature
+10 C to 32 C
+16 C to 32 C
+18 C to 38 C
+18 C to 43 C
4 C
19 C