Before Using The Oven For The First Time; Heating The Oven; Cleaning The Accessories; Setting The Oven - Blaupunkt 5BD3..50 Serie Gebrauchsanleitung

Before using the oven for the first time

In this section, you can find out what you must do before using
your oven to prepare food for the first time. First read the
section on Safety information.

Heating the oven

To remove the "new" smell, heat the oven empty with the door
closed. The most effective option is to heat the oven for one
hour with the top and bottom heating elements
240 ºC. Check that no packaging has been left inside the oven.
Select top and bottom heating
1.
knob.

Setting the oven

There are various ways in which you can set your oven. Here
we will explain how you can select the desired type of heating
and temperature or grill setting.

Setting the type of heating and temperature

Example in diagram: % Top/bottom heating at 190 °C.
Use the function selector to select the type of heating.
1.
Set the temperature or grill setting using the temperature
2.
selector.
The oven begins to heat up.
Switching off the oven
Turn the function selector to the off position.

Care and cleaning

If cleaned and properly cared for, your oven will keep its bright
appearance and operating performance for many years to
come. Advice on how to care for and clean your oven is
provided below.
Notes
Different colours may be seen in your front panel due to the
■
various materials used in its manufacture, such as glass,
plastic and metal.
Dark patches in the door's glass panel may seem to be dirt
■
but they are in fact reflections from the oven light.
Enamel burns at very high temperatures. This may cause
■
slight discolouration. This is normal and does not affect the
oven's operation. The edges of thin baking trays may not be
completely enamelled. They may therefore feel slightly rough,
although their corrosive protection will be unaffected.
% set at
% using the function control
Select 240 ºC with the temperature control knob.
2.
Turn the oven off after one hour. To do this, turn the function
control knob to zero.

Cleaning the accessories

Before using the accessories for the first time, clean them
thoroughly using a cloth, hot water and a little soap.
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.

Rapid heating

With the rapid heating setting, the oven reaches the
programmed temperature very quickly.
Rapid heating must be used for temperatures of more than
100 ºC.
To ensure uniform cooking, the food must not be put into the
oven until rapid heating has been completed.
Select rapid heating
J
1.
Select the required temperature using the temperature
2.
control knob.
The oven will begin to heat up.
End of rapid heating
The rapid heating function will have ended after 10 minutes.
Place the food in the oven and select the required function and
temperature.
Cancelling rapid heating
Set the function control knob to the zero setting. The oven
switches off.

Cleaning products

Follow the indications provided in the table to avoid damaging
the various oven surfaces by using unsuitable cleaning
products. Do not use
abrasive or acidic cleaning products
■
strong products containing alcohol
■
scourers or hard sponges
■
high-pressure or steam cleaners
■
Wash new dishcloths thoroughly before use.
using the function control knob.
25