Lighting Unit - ROBLIN Milano/2 750 Bedienungsanleitung

Activated Charcoal Filter (Recirculation Version)
It cannot be washed or regenerated, and must be changed when the EF symbol on the display
appears, or at least once every 4 months. The Alarm signal, if it has been activated, only ap-
pears when the Suction motor is turned off.
Activating the alarm signal
• In Recirculation Version Hoods, the Filter Saturation Alarm must be activated on installa-
tion or at a later date.
• Turn the Lights and the Suction Motor off.
• Press E and hold for approximately 5 Seconds(see the paragraph on Use):
• The message EF flashes twice, A.C. Filter saturation alarm ACTIVATED
• The message EF flashes once, A.C. Filter saturation alarm DEACTIVATED
CHANGING THE ACTIVATED CHARCOAL FILTER
Resetting the alarm signal
• Turn the Lights and the Suction motor off, then disable the 24h
function, if enabled.
• Press button E (see the paragraph on Use).
Changing the Filter
• Open the Comfort panels by pulling on the recess.
• Remove the Metal grease filters.
• Remove the saturated Activated Charcoal Filters, as indicated
(A).
• Fit the new Filters, as indicated (B).
• Replace the Metal grease filters.
• Close the Comfort panels.
Warning: This appliance is fitted with a white LED lamp classed as 1M
according to EN 60825-1: 1994 + A1:2002 + A2:2001 standards; maxi-
mum optical power emitted @439nm: 7µW. Do not look directly at the
light through optical devices (binoculars, magnifying glasses...).
• For replacement contact technical support. ("To purchase contact tech-
nical support")
EN

Lighting unit

B
A
2 22