Trimming The Quadrocopter - Carrera RC 370503018 Montage- Und Betriebsanleitung

18 b
Functional overview of the flight menu:
1. Press this button to take photos
2. Press this button to take videos
3. Here you find the photos and videos taken on
your smartphone
4. Here, rotate the camera picture by 180°
5. Use this button before inserting the mobile
phone into the 3D VR glasses.
You are able to view all of the recorded videos
in the 3D VR perspective in the file: just acti-
vate this mode in the corresponding menu by
means of pressing the
You will find the pictures / videos in the respec-
tive picture / video file in your unit. (Please note
the access rights for the IOS). An additional
video player may possibly be required.
18 c
Wear the 3D VR spectacles (not included)
We recommend that you learn to fly the Quad-
rocopter reliably first of all, before you use the
3D spectacles!
CAUTION! NEVER fly a Quadrocopter with
the 3D VR spectacles alone! You would com-
mit a criminal offence by doing so!
Ensure that a 2nd person is standing next to
you whenever you fly the Quadrocoper while
wearing the 3D spectacles. The 2nd person
must monitor the Quadropcopter's position for
you and help you to correct the flying position, in
order to prevent accidents.
Please note that you only have a limited
field of vision!
19
Altering the camera angle
Using the setting wheel on the controller top
right, the camera angle can be altered (ap-
prox. 70°-80° tilt).
Automatic control of altitude
20
The Quadrocopter will maintain the current flying
altitude automatically as soon as you release the
left-hand joystick during the flight.
Auto Landing
21
You can trigger the automatic landing function at
any time by means of pressing the 'Auto landing'
button. The speed of the rotors will reduce grad-
ually as a result. You are able to influence the
landing position at any time during the landing
procedure by means of moving the right-hand
-icon.
21
joystick. The motor will switch itself off as soon
as the Quadrocopter is on the ground.
Auto-Start & Fly to 1.5m
22
Press the 'Auto-start & fly to 1.5 m' button on the
controller, in order to start the motors and auto-
matically fly up to the altitude of about 1.5 m . You
are able to influence the direction of flight at any
time during the starting operation by means of
moving the right joystick. The Quadrocopter will
maintain itself in position automatically as soon
as the altitude of about 1.5 m has been reached.

Trimming the Quadrocopter

23
Auto-trimming
1. Place the Quadrocopter on a horizontal
surface.
2. Link the Quadrocopter with the control-
ler as described in "Linking the model with
the controller".
3. Slide the gas lever and the lever for for-
ward / back simultaneously into the right
lower corner. The LED on the Quadrocopter
flashes on briefly and then lights up contin-
uously. The signalling tone will sound once.
4. The neutral setting is completed.
24
When hovering, if the Quadrocopter flies to
the left or right without you moving the lever
for left / right movement, please proceed as
follows: If the Quadrocopter moves on its own
fast or slow sideways to the left, press the low-
er right trimmer for right / left tilt in steps to the
right. If the Quadrocopter moves right, press
the trimmer for right / left tilt in steps to the left.
25
When hovering, if the Quadrocopter flies for-
wards or backwards without you moving the
lever for forwards or backwards movement,
please proceed as follows: If the Quadrocop-
ter moves on its own fast or slow forwards,
press the upper right trimmer for forwards /
backwards in steps downwards. If the Quad-
rocopter moves backwards, press the trimmer
for forwards / backwards in steps upwards.
26
When hovering and without you moving the
lever for circling on the spot, if the quadrocop-
ter rotates to left or right, proceed as follows: If
the quadrocopter rotates quickly or slowly to
the left around its own axis, press the trimmer
for rotation below left in steps to the right. If
ENGLISH