Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
1) Attach the LED curtain via its Velcro loops, e.g. to a truss element. Smoothen the curtain fabric and take
care not to bend the inner cables. Do not step on the curtain to avoid damaging the installed LEDs and
electronics.
2) Plug the LED curtain's connection cable into the corresponding jack on the controller. Lock the connector
with the retaining ring.
3) Connect the supplied power supply cable to the corresponding input on the controller and the mains plug
to an outlet. The unit is designed for 100-240V~, 50/60 Hz. Switch on the device.
Important notes
1) The LED curtain must be installed in a professional and safe manner. Never block any escape routes
with the LED curtain!
2) Do not to bend the inner cables of the LED curtains when disassembling and packing.
3) Do not step on the curtain to avoid damaging the installed LEDs and electronics.
4) Carefully fold the LED curtain and place it in the designated transport bag.
OPERATION
After switching on the display indicates the last operating mode. The operating modes can be selected by
means of the display and the control buttons. All settings remain stored even if the device is disconnected
from the mains. The device can be operated in stand-alone mode via the control board or in DMX-controlled
mode via any commercial DMX controller.
Operating buttons
Element
Function
ESC
Exits the current level and returns to the start display.
ENTER
Activates a value to be modified.
UP
Selects the next menu item and increases values when modifying.
DOWN
Selects the previous menu item and decreases values when modifying.
FUNCTION
Turn to select menu items and modify values. Push shortly to confirm. Press 3 seconds
to exit the current level.
Menu structure
Modus
Auto Mode
Fade
Sound control
Pattern
Slave mode
DMX operation
Software version
Static mode
Display
Au00 - Au08
Auto
A500 - A599
FAde
F500 - F599
So00 - So08
Soud
Se00 - Se31
A000 – A255
B000 – B255
PAtt
C000 – C255
D000 – D255
Cf00 – Cf99
SLAu
Addr
d.001 – d.512
Ver
u - - -
StAt
S000 – S015
18/24
Function
Program selection
Running speed
Running speed
Program selection
Microphone sensitivity low > high
Brightness LED group 1
Brightness LED group 2
Brightness LED group 3
Brightness LED group 4
Strobe speed low > high
Slave mode
Starting address
Viewing the software version
Program selection
00114933, Version 1.2
Werbung
Inhaltsverzeichnis
