Maintenance And Service; Maintenance And Cleaning - Bosch GLL 2-50 Professional Originalbetriebsanleitung

OBJ_BUCH-817-003.book Page 24 Tuesday, March 17, 2009 8:51 AM
24 | English
Projecting Plumb Points to the Ceiling
(see figure K)
Draw two lines crossed at a right angle through
the point that you want to project to the ceiling.
Place the alignment plate 12 onto the crossed
lines and align it with the alignment aids 13 and
14 on the cross.
Position the measuring tool via the tripod mount
6 onto the pin 16 of the alignment plate. Posi-
tion it in such a manner on one of the two outer
protrusions on the alignment plate that the ver-
tical laser line runs centrally through the corre-
sponding alignment aid 13 or 14. Select vertical
operation and draw the centre of the line run-
ning across the measuring tool to the ceiling.
Turn the measuring tool on the alignment plate
by 90°. Pay attention not to move the position
of the alignment plate. After levelling in, draw
the cross point of the vertical laser line to the al-
ready drawn line. The cross point of both lines
is the projected plumb point.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in
the protective pouch 17 or in the case 18.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool into water
or other fluids.
Wipe off debris using a moist and soft cloth.
Do not use any cleaning agents or solvents.
Regularly clean the surfaces at the exit opening
of the laser in particular, and pay attention to
any fluff of fibres.
If the measuring tool should fail despite the care
taken in manufacturing and testing procedures,
repair should be carried out by an authorized
after-sales service centre for Bosch power tools.
Do not open the measuring tool yourself.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the measuring tool.
For repairs, only send in the measuring tool in
the protective pouch 17 or in the case 18.
1 609 929 S02 | (17.3.09)
Accessories
Protective Pouch 17 . . . . . . . . . 1 609 203 X77
Case 18 . . . . . . . . . . . . . . . . . . . 2 605 438 682
Laser Viewing Glasses 19 . . . . . 2 607 990 031
Measuring plate with foot 20 . . . 2 607 002 195
Laser Receiver 21 . . . . . . . . . . . 0 601 069 100
Construction tripod BS 150 . . . . 0 601 096 974
Universal holder BM 1 . . . . . . . . 0 601 015 A00
Telescopic rod BT 350 . . . . . . . . 0 601 015 B00
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Bosch Power Tools