Safety Notes - geo-FENNEL Geo5X-L360 HP Bedienungsanleitung

EN
H

SafETy noTES

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting windows; after instrument has been drop-
ped or hit. Please check accuracy.
Large fluctuation of temperature: If instrument will be used in cold areas after it has been stored in warm areas
(or the other way round) please wait some minutes before carrying out measurements.
CARE AND CLEANING
Handle measuring instruments with care. Clean with soft cloth only after any use. If necessary damp cloth with
some water. If instrument is wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in original
container / case only.
ELECTROMAGNETIC ACCEPTABILITy (EMC)
It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation systems);
will be disturbed by other instruments (e.g. intensive electromagnetic radiation nearby industrial facilities or radio
transmitters).
CE-CONFORMITy
Instrument has CE-mark according to EN 61010-1:2001 + corr. 1+2, IEC 60825-1:2008:05.
WARRANTy
This product is warranted by the manufacturer to the original purchaser to be free from defects in material and
workmanship under normal use for a period of two (2) years from the date of purchase. During the warranty
period, and upon proof of purchase, the product will be repaired or replaced (with the same or similar model at
manufacturers option), without charge for either parts or labour. In case of a defect please contact the dealer
where you originally purchased this product. The warranty will not apply to this product if it has been misused,
abused or altered. Without limiting the foregoing, leakage of the battery, bending or dropping the unit are presu-
med to be defects resulting from misuse or abuse.
EXCEPTIONS FROM RESPONSIBILITy
1. The user of this product is expected to follow the instructions given in operators' manual. Although all
instruments left our warehouse in perfect condition and adjustment the user is expected to carry out
periodic checks of the product's accuracy and general performance.
2. The manufacturer, or its representatives, assumes no responsibility of results of a faulty or intentional
usage or misuse including any direct, indirect, consequential damage, and loss of profits.
3. The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of
profits by any disaster (earthquake, storm, flood etc.), fire, accident, or an act of a third party and/or a usage
in other than usual conditions.
4. The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits
due to a change of data, loss of data and interruption of business etc., caused by using the product or an
unusable product.
5. The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits
caused by usage other than explained in the users' manual.
6. The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong
movement or action due to connecting with other products.
16