All-Frame Erase; Formatting (Card Setup) - Olympus C-5050ZOOM Anleitung

3
Press
• The
4
Press
• The picture is erased and the menu is closed.

All-frame erase

1
In the top menu, select MODE MENU → → → → CARD → → → → CARD
SETUP, and press
2
Press
3
Press
• All the pictures are erased.

FORMATTING (CARD SETUP)

En
This function lets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format them with this camera.
• All existing data, including protected data, is erased when the card
is formatted. Once erased, pictures cannot be restored, so make
Note
sure that you do not erase important image data. Download
important image data to a PC before formatting the card.
1
In the top menu, select MODE MENU → → → → CARD → → → → CARD
SETUP, and press
•
The
•
The CARD SETUP screen is displayed.
2
If the mode dial is set to
press
If the mode dial is set to
FORMAT, then press
displayed. Press
3
Press
• The busy bar is displayed and the card is formatted.
42 En
.
ERASE screen is displayed.
to select YES, then press
.
to select
to select YES, then press
.
FORMAT screen is displayed.
to select FORMAT.
to select YES.
.
ALL ERASE, then press
.
, press to select
. The FORMAT screen is
.
.
,