Protecting Pictures; Erasing Pictures; Single-Frame Erase - Olympus C-5050ZOOM Anleitung

When FRAME BY FRAME is selected
: Displays the first frame of the movie.
: Displays the last frame of the movie.
: Displays the next frame. The movie can be played continuously by
holding the button down.
: Displays the previous frame. The movie can be played continuously in
reverse by holding the button down.
: Displays the MOVIE PLAYBACK menu.

PROTECTING PICTURES

You are recommended to protect important pictures to avoid accidentally
erasing them.
1
Set the mode dial to
• The monitor turns on.
2
Use the arrow pad or jog dial to display the picture you
want to protect.
3
Press .
• To cancel protection, press
• Protected pictures cannot be erased by the single-frame/all-frame
erase function, but they are all erased by formatting.
Note

ERASING PICTURES

This function enables you to erase recorded pictures. This can be done either
one frame at a time or to all the pictures on the card at once.
• Once erased, pictures cannot be restored. Check each picture
before erasing to avoid accidentally erasing pictures you want to
Note
keep.

Single-frame erase

1
Set the mode dial to
• The monitor turns on.
2
Use the arrow pad or jog dial to display the picture you
want to erase.
and turn the camera on.
again.
and turn the camera on.
En
En 41