Connection Of The Hob; Technical Deatails - KKT KOLBE SET6008ED Benutzerhandbuch

Installation and connection of the device
Important
During installation, the power cable position must be taken
account in. Avoid the temperature to be above 50 °C at any
point of the power cable. The oven complies with safety
standards set by the regulatory bodies. The oven is safe to
use only if it has been adequately earthed in compliance with
current legal requirements on wiring safety. You must ensure
that the oven has been adequately earthed.
The manufacturers cannot be held responsible for any
harm or injury to people, animals or belongings caused by
failure to properly earth the oven.

Connection of the hob

The hob works with 230V alternating current, electrical con-
nection must get the power from the oven. Remember that
the connection should match the same colour , here, for ex-
ample is Black – Black, White-White, Blue-Blue, Green-Green.
Insert the plug located at the end of the hob's cable bund-
le into the respective sockets on the oven switch panel.
Technical details
Supplier's name
Model
Oven model
Hob model
Energy efficiency class
Energy consumption
Oven capacity
Airborne noise emission
Design
Number of cavities
The heat source per cavity
Energy efficiency index(EEIcavity)
Total power input
Power input oven
Power input hob
Mains voltage / frequency
Fuse
Protection class / degree
hob connector, protec-
KKT KOLBE
SET6008ED
EH6008ED
EM590RL
A
0.89 kWh
70 Liters
58dB(A)re1pW
Built-in unit
1
Electricity
106
9000 W
3000 W
6000 W
220-240 V~, 50/60 Hz / 380-415 V~, 50/60
Hz
3 x 16A
I / IP20
tive conductor
power connector
35