Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and connection of the device
4. Secure the hob to the worktop by tightening the four
brackets on the underside of the hob (after connecting the
power). Adjust the brackets on your plate thickness. •
1
2
Caution
• The ceramic cooker hob must be installed by qualified personnel or tech-
nicians. We have professionals at your service. Please never conduct the
operation by yourself.
• The ceramic cooker hob shall not be mounted on cooling equipment,
dishwashers and rotary dryers.
• The ceramic cooker hob shall be installed such that better heat radiation
can be ensured to enhance its reliability.
• The wall and induced heating zone above the work surface shall with-
stand heat.
• To avoid any damage, the sandwich layer and adhesive must be resistant
to heat.
• A steam cleaner is not to be used.
• This ceramic can be connected only to a supply with system impedance
no more than 0.427 ohm. If necessary, please consult your supply authori-
ty for system impedance information.
screw
bracket
base
screw hole
screw
bracket
base
screw hole
!
33
Werbung
Kapitel
Inhaltsverzeichnis
