Operation; Temperature Setting - Pkm KS 117.4 Bedienungsanleitung

door bearing and the door. Install the cover cap (M) on the opposite side. Turn the
door by 180 0 and fix the lower door bearing in the relevant opening. Lift the door
slightly upwards, fit it into the upper door bearing; at the same time insert the lower
door bearing in the square hole.
Move the door up- and downwards carefully so the installation will be easier.

4. Operation

1. Freezer compartment
3. Shelf
5. Door shelves

4.1 Temperature setting

AFTER HAVING INSTALLED THE APPLIANCE WAIT 4 HOURS BEFORE
YOU CONNECT IT TO THE MAINS.
0
1
7
2. Thermostat
4. Crisper
OFF Turn clockwise to switch on the
Highest temperature = warmest setting
Lowest temperature = coldest setting
32
appliance.