Location; Cleaning And Maintenance; Changing Of The Hinge Position; Risk Of Electric Shock - Pkm KS 117.4 Bedienungsanleitung

3.2 Location

1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild
detergent (see also chapter
components of the back of the appliance!
3. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is situated inside the appliance or at the back.

3.3 Changing of the hinge position

1.
WARNING! Switch off and unplug the appliance before changing.

RISK OF ELECTRIC SHOCK!

2. The appliance must be empty.
3. Carry out the changing with at least two persons.
4. Be careful when opening the sprung hinges. RISK OF INJURY.
Remove the
covers of the door

CLEANING AND MAINTENANCE

shutter With the door closed
remove the screws on the
outside of the hinges.
Start with the top hinge.
Open the hinges.
30
). Never remove any