Installation Types - Watts WIFI Montage- Und Bedienungsanleitung

INSTALLATION TYPES

(HEATING/COOLING)
Type 1 :
In this configuration:
• Pair first the thermostat (master) with the Central before
pairing the other devices (configured as heating devices).
• The actuators regulate on thermostat temperature.
Type 2 :
In this configuration:
• Pair first the thermostat (master - configured as a heating
device) with the Central before pairing the other devices.
• The other devices regulate on thermostat temperature.
Warning! In this installation type, the BT (MASTER) must be in
regulation Air mode (not floor or Air + Floor)
Type 3 :
In this configuration (no thermostat);
⇒ BT-TH configured as heating device.
BT-PR, BT-FR, BT-WR can be configured as an On/Off or
lighting devices.
Type 4 :
In this configuration:
⇒ Each thermostat is first paired with the appropriate UFH1 and
then the UFH1(s) are paired with the Central
⇒ During the pairing, the Central automatically creates rooms
according to the number of thermostats (rooms) of UFHs.
5 SET UP REMOTE CONTROL
1 Connect the central unit to your WiFi network: To do this;
Go to installation menu (long press)
Choose WiFi settings
Choose Research Networks (searches for your wifi)
Choose your WiFi from the list
Enter your regular WiFi password
Observe unit counting down from 120 to zero
Make sure that the central is now connected to the WiFi network
with an IP address (WiFi status should read 1/2)
Press the home key to go back to front screen
If after several attempts, connection is unsuccessful, connect the
central unit to WiFi manually (see WiFi settings page 9).
2 Download the app to your device;
For PC; click on dedicated link available on www.wattswater.eu
homepage
For Smartphone; download WATTS® Vision™ application from
App store or Google Play.
3 Create an Account
Enter your details and select language.
Select "Validate" (email will be sent to you with link).
Go to your email and click on the link.
Go back to your App account and follow the on screen
instructions.
Request a pairing code to link your central unit. The pairing
code (valid 24h) is sent to your email inbox.
In the WiFi status menu
pairing code (internet access password)..
Your central unit should appear after a few minutes in the
application or the web page. Click the refresh button if
necessary. WiFi status should read 2 /2.
Please note! It may take up to a few hours to display all rooms
and devices in the application. You can then operate your central
unit from anywhere.
Watts is not responsible for the correct operation of the
connected devices, and potential damage caused by malfunction
or improper use of the connected devices and appliances.
6 HEATING/COOLING DEVICES
MANAGEMENT & PROGRAMMING
Press on in the main screen and after selecting the room,
press on
4
1
12
2
5
of the central unit, enter the
13
6
5
3
11
2
8
7
10
7
7
9