Charging The Device - Aspire Puxos Bedienungsanleitung

Using the Device
Note for Cleaning
Use a dry cloth or cotton swab to clean the device.

Charging the Device

Connect the device to a PC or notebook via the supplied Micro-USB cable. The maximum
charge rate is 2A. If you connect the device to the charging cable, the display will show
the battery's current charge status. The charging process will stop automatically and
the display will switch off once it is completely charged (4.2V). The battery CANNOT be
changed during the charging process. To do this, please disconnect the USB connection
first. If using a wall adapter, make sure it is suitable for charging with a current of 5V/2A.
Note:
If the charging voltage falls below 1.5V or if the battery is not inserted correctly, the
charging process will stop. As soon as the charger's voltage is below 4.3V or above 5.5V,
the charging process stops and CHECK CHARGER appears on the display.
47