Herunterladen Inhalt Inhalt Diese Seite drucken

Before Initial Use; Functions - Avalon Bay 02284 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Before Initial Use

PLEASE NOTE!
Always set up the device with a clear space on all sides (at least 20 cm) and clear
space above it (at least 30 cm) on a dry, fl at, solid and heat-resistant surface.
Do not place the device below kitchen wall units or similar cupboards. The rising
steam could cause damage to them!
The surfaces of furniture may possibly contain elements which can attack and soften
the adjustable feet of the device. If necessary, place a suitable pad below the adjust-
able feet.
There may still be some production residues on the device. To avoid harmful effects
to your health, clean the device before you fi rst use it (see the "Cleaning and Care"
chapter).
1. Clean the device and all accessories thoroughly (see the "Cleaning and Care" chap-
ter).
2. Fully unwind the mains cable from the cable winder.
3. Set up the device in a suitable location, following the safety instructions and the notes
provided at the beginning of this chapter.
4. Insert the mains plug into a properly installed socket that is easily accessible. A beep
will be heard and the display (A) lights up briefl y.
5. Before you fi rst use the device with foodstuffs, we recommend that you carry out a
trial run to remove any possible production residues. To do this, follow the instructions
in the "Operation" and "Cooking" chapters.
When the device is fi rst used, production-related additives (e.g. grease) may
cause a small amount of smoke and / or an odour to be produced. This is normal
and not a device defect.
6. Clean the device and accessories (see the "Cleaning and Care" chapter).

Functions

G
F
E
The display (A) shows the selected temperature and operating time.
The device is switched on with the On/Off switch (B). The display lights up and the
temperature and operating time can be set.
23
A Display with time and
temperature display
B
C + (Increases temperature/
A
time setting)
D °C / °F
E Timer / Temp
B
F – (Decreases temperature/
time setting)
C
G Start / Stop
D
On/Off switch
EN

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ls-sv01d

Inhaltsverzeichnis