Troubleshooting - Klarstein 10030014 Bedienungsanleitung

Dust or anything else blocking the vent may hinder the cooling efficiency of the appliance. Vacuum the vent
if necessary.
Vacation time
• Turn off the wine cooler first and then unplug the unit from the wall outlet.
• Remove all the contents.
• Clean the appliance.
• Leave the lid open slightly to avoid possible formation of condensation, mold, or odors.
Moving your appliance
• Turn off the wine cooler first and then unplug the unit from the wall outlet.
• Remove all the contents.
• Securely tape down all loose items inside your appliance.
• Tape the doors shut.
Energy saving tips
• The wine cooler should be located in the coolest area of the room, away from heat producing appli-
ances or heating ducts, and out of the direct sunlight.
• Ensure that door is properly closed when the wine cooler is turned on.
Problem
Wine cooler does not operate.
Temperature inside the wine
cooler is too warm.
Temperature inside the wine
cooler is too cold.

Troubleshooting

Possuble Cause
Not plugged in.
The circuit breaker tripped or a blown fuse.
Temperature control is set too warm. Turn the control to a cooler
setting and allow several hours for the temperature to stabilize.
Door is kept open too long or is opened too frequently. Warm air
enters the wine cooler every time the door is opened. Open the door
less often.
The door is not closed completely.
The door gasket does not seal properly.
The wine cooler has recently been disconnected for a period of time. 4
hours are required for the wine cooler to cool down completely.
Temperature control is set too cold. Turn the control to a warmer setting
and allow several hours for the temperature to stabilize.
16