Cleaning And Ordering Spare Parts; Disposal And Recycling; Excluded From The Guarantee Are - EINHELL 41.377.55 Originalbetriebsanleitung

Anleitung_DTA_25_2_SPK7:_

8. Cleaning and ordering spare parts

Important: Disconnect the equipment from the
compressed air system each time before starting to
carry out maintenance and cleaning work.
8.1 Cleaning
Keep the trigger catch (Fig. 1/Item H) free of dirt
and dust as far as possible. Wipe the equipment
with a clean cloth or blow it down with
compressed air at low pressure.
We recommend that you clean the equipment
immediately after you use it.
Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the
plastic parts in the equipment. Ensure that no
water can get into the interior of the equipment.
8.2 Ordering replacement parts
Please provide the following information on all orders
for spare parts:
Model/type of the equipment
Article number of the equipment
ID number of the equipment
For our latest prices and information please go to
www.isc-gmbh.info

9. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.

10. Excluded from the guarantee are:

Wear parts
Damage caused by inadmissible operating
pressure.
Damage caused by compressed air which has
not been conditioned.
Damage caused by improper use or unauthorized
intervention.
07.09.2011 13:33 Uhr Seite 15
GB
15