Electrolux GA60SLVSCN Benutzerinformation Seite 10

10 www.electrolux.com
Settings
Water hardness
Languages
Display on floor
Reset settings
Rinse aid level
6.2 How to change a setting
with 2 values (ON and OFF)
When a setting is changed it will remain
valid even if the programme is completed
or a running programme is cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
5. Press the OK key to change the value
from ON to OFF or vice versa.
6. Press repeatedly the Option key until
the display shows the programme list.
6.3 How to change a setting
with multiple values
When a setting is changed it will remain
valid even if the programme is completed
or a running programme is cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
5. Press the OK key to enter the next
level.
6. Select the new value.
7. Press the OK key to confirm.
8. Press repeatedly the Option key until
the display shows the programme list.
Values
From level 1 to level 10.
List of languages.
List of colours.
Reset
From level 0 to level 6.
Level 0 = no release of rinse
aid.
6.4 How to save the
MyFavourite programme
You can only save 1 programme at a time.
A new setting cancels the previous one.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select Set MyFavourite.
5. Press the OK key.
The display shows the programme list.
6. Select a programme.
7. Press the OK key.
8. The display shows Add option and
9. Press the OK key.
If the programme has the TimeSaver
option, you have to select Fast or Normal.
10. Press the OK key to confirm.
The display confirms that the MyFavourite
programme has been saved.
Description
Set the level of the water
softener according to the
water hardness in your
area.
Factory setting: level 5.
Set the preferred language.
Default language: English.
Set the colour of the Time-
Beam
Reset the appliance to fac-
tory settings.
Set the level of the rinse aid
dispenser according to the
necessary quantity of rinse
aid.
Factory setting: level 4.
Done.
• Select Done if you want to save a
programme without options and
press the OK key.
• Select Add option to add an option
to the programme and press the
OK key to confirm. Once an option
has been selected the display
shows Add option and Done. If you
want to select another option
select again Add option otherwise
select Done.