Troubleshooting; Hints On Disposal; Declaration Of Conformity - Klarstein 10012197 Kurzanleitung

Suitable pots
• This device is suitable for use with cookware made from: steel, stainless steel, iron, emaillierem iron, cast iron
with a flat bottom and a diameter 12 to 26 cm.
• This appliance is not suitable for the use with the following cookware: heat-resistant glass, ceramic, copper,
aluminium with rounded bottom and less than 12 cm in diameter.
Error Code Possible Cause
E0 Wrong pot.
E1 Circuit malfunction.
E2 Problem with the temperature sensor.
E3 Surge (more than 275V).
E4 Undervoltage (less than 100W).
E5 Overheating of the pot bottom.
E6 The airflow has been interrupted.
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailled information about recycling of this product, please contact your local council or your
household waste disposial service.
9

Troubleshooting

Hints on Disposal

Declaration of Conformity

Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
Solution
Use a suitable pot.
Contact a professional.
Contact a professional.
Check the power circuit and find a suitable
power supply.
Check the power circuit and find a suitable
power supply.
Let the appliance cool down.
Check the airflow vents and clean them from
the outside. If the problem persists, contact a
professional.