FALMEC Sintesi Gebrauchsanweisung Seite 17

ADDITIONAL FUNCTIONS
"90 PREMIUM" MODEL
STOP AND GO
This function allows to temporarily stop cooking and restore it with the same settings.
to enable touch the key .
If the function is not deactivated within 10 minutes, the cooker switches of.
For deactivation
Touch the key and within 5 seconds completely slide the slider to right.
AUTOMATIC PROGRAMMING OF THE COOKING
This function allows to speed up the start of cooking.
The procedure is the following:
1 - turn on the cooker
2 - touch for more than 2 seconds the desired level of cooking:
on the display will be displayed and the desired level of cooking
For a certain period the cooking area will work at the maximum power to then rech the
set level.
To deactivate the function:
touch again the control
RESTORE FUNCTION
After turning of the cooker, it is possible to restore the last selected settings:
· Status of cooking of all cooking areas (power).
· Minutes and seconds of the timer by programmed cooking areas.
· Automatic programming of cooking.
The restore procedure is the following:
- turn on the cooker.
· touch within 6 seconds the key .
Previous settings are restored.
CHEF FUNCTION
It allows setting for each cooking area pre-deined power for each cooking phase.
Area 4: power level 9. Cooking start.
Area 3:
power level 6. Cooking continuation.
Area 2: power level 3. Cooking end.
Area 1: power level 1. Keep warm.
.
.
17