Part Names; Control Panel; Setting Up The Printer; Connecting The Cables - Epson TM-T88V Benutzerhandbuch

English

Part Names

See illustration A on page ii and the part names on page 1.

Control Panel

(Power) LED
This LED is on when the printer is on.
Error LED
This indicates an error.
Paper LED
On indicates a paper near end or out. Flashing indicates standby.
Feed button
This button feeds paper.
Installing the Printer Horizontally or Vertically
You can install the printer horizontally on a flat surface (with the paper exit on
top) or vertically (with the paper exit at the front) by hanging it on a wall, using
the optional WH-10 hanging bracket set.
WARNING:
When hanging the printer on the wall with the hanging bracket set, be sure to
attach a connector cover to the printer.

Setting Up the Printer

To set up the printer, follow the steps below.
1. Connect the cables.
2. Attach the connector cover.
3. Install the roll paper.

Connecting the Cables

CAUTION:
For a serial interface, use a null modem cable.
For a parallel interface, use an IEEE 1284 cable.
For a USB interface, do not turn on the printer before installing the printer driver.
1. Connect the AC cable, each interface cable, and the cash drawer cable to the
connectors on the printer back. For the shape of each connector, see
illustration B on page ii. (Mounted interfaces vary by specification.)
2. Connect the interface cable to the computer.
3. Insert the AC cable plug into a power outlet.
4 TM-T88V User's Manual