Herunterladen Inhalt Inhalt Diese Seite drucken

Scanning For Stations; Selecting Stations - auna Worldwide Bedienungsanleitung

Dab / wlan-/lan-internet / fm / ukw
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

music, a large number of options is available for selecting tracks or titles which including genre, artist,
album, composer and rating. Once you have located a track you want to play, press on the SELECT control.
Insert a USB drive into the USB port on the rear. A corresponding message will appear on the display,
prompting you to decide whether to list the drive content on the display.
To access a previously connected USB drive, select MUSIC PLAYER with the MODE button, and select
USB then.
Use the scroll/multi wheel and the arrow buttons to navigate through your media library and select
the desired track.
DAB radio mode receives DAB/DAB+ digital radio and displays information about the station, stream and
track playing. To enter DAB mode, either press MODE until the display shows „DAB radio" or select „DAB
radio" in the main menu by the use of the SELECT control.
The first time you select DAB radio mode, or the station list is empty, the radio will automatically perform a
full scan to see what stations are available. You may also need to run a scan manually to update the list of
stations for the following reasons:
Available stations might change from time to time
lf the reception is not good for the original scan, this may result in an empty or incomplete Iist of avail-
able stations.
Once the scan is completed, the radio shows a Iist of available stations.
To listen or change a station, rotate the SELECT control followed by pressing an it to confirm. The informa-
tion of the station selected will be displayed.
To view further information, press the INFO-button upon each press, another set of information is displayed
cycling through DLS text, programme type, ensemble name/frequency, signal strength/error rate, bit rate/
codec/channels and current date.
To store a DAB preset, press and hold the MEMORY button until the display shows the „Save to Preset"
screen. Select one of the 10 presets to store the current station. To select a preset, press the MEMORYbut-
ton once, then select one of the listed preset stations. When a preset station is playing, „Pn" (P1, P2 etc ... )
will appear in the lower part of the display.
USB
DAB

Scanning for stations

Selecting stations

Presets
29
www.auna.de

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10026443

Inhaltsverzeichnis