Alert Tones And Alarm Signals - Jung FRWM-AR Betriebsanleitung

8 Alert tones and alarm signals

To reset the FRWM-AR to the default
status, press and hold the configuration
The FRWM-AR alarm relay signals differ-
ent events using different alert tones and
alarm signals:
Alert tones
1. "Caution: Low battery charge"
90 Seconds
If the battery charge has reached a critical
point, the FRWM-AR signals this with a
short beep at regular intervals.
10 Seconds
2. "Group participant lost"
If you have initiated a connection test us-
ing a FRWM and a participant in the ra-
dio group has been lost, the FRWM-AR,
as well as all other connected FRWMs,
34
Operating Manual: FRWM - AR Alarm Relay
produces a triple-beep at regular intervals.
You can therefore check which group par-
ticipant is not producing a signal tone and
is therefore not connected.
Alarm signals
1. Smoke alarm:
0.5 Seconds
If a FRWM in the radio group triggers a
smoke alarm, then the FRWM-AR and
the radio alarms produce 2 beeps at
short intervals.
2. Temperature alarm:
1 Second
If a FRWM in the radio group triggers a
temperature alarm, then the FRWM-AR
and the radio alarms produce a single
beep at short intervals.
EN