Jung FRWM-AR Betriebsanleitung Seite 28

3.2 Construction
1. Relay: You can connect a voltage of
between 3 and 30V and an output current
of 1-100mA to the relay (alarm output
with changeover contact (NC/NO))
1.1 NC (normally closed)
1.2 COM (ground)
1.3 NO (normally opened)
2. Input: A maximum voltage of 24V can
be connected to the potential-free alarm
input. The switching level is >1,6 V.
3. Status-LED: Displays various events.
28
Operating Manual: FRWM - AR Alarm Relay
4. Buzzer: Acoustic signal in the event
of an alarm.
5. Configuration button: Using the
supplied split pins, you can configure the
FRWM-AR by gently pressing the button.
- +
1 2 3 4 5
EN